|
You can ask your questions direct by using ICQ when
we are online. Our ICQ number is 163202313.
If
you do not have ICQ, please download it for free at www.icq.com
| 1 |
Use 3 Pushbuttons connected to 3 Digital Inputs and LCD for
feedback:
Button 1: Select parameter
Button
2: + (Increment)
Button 3: - (Decrement)
| Advantages: |
Low cost. Great for occasional
adjustment of parameters. |
| Disavantages: |
Use up 3 D/I.
|
|
 
Sample TRiLOGI file:
setTimerCtr_SV.PC5
Sample file
printout: setTimerCtr_SV.pdf
|
| 2 |
Use
1KW Potentiometer connected to an Analog Input - scale the input readings (0-4096) to
fit the desired range for the parameters. A marked dial can provide a rough
indicator of the settings, but if you have an LCD display then you can obtain
very precise settings.
| Advantages: |
Extremely low cost (<
$1).
Easy to adjust. |
| Disavantages: |
Use up 1 analog input per
parameter. |
|
Sample TRiLOGI file: Analog-Timer.PC5
Sample file printout:
Analog-Timer.PDF
|
| 3. |
Use the MD-HMI Module (T100MD+ Only)* - This new product comprises one 4 lines x 20 characters LCD
display; a 16 keys keypad and 8 LEDs. This module is plugged into the LCD port
and the expansion port of the PLC. It does not use up any of the PLC's I/O. The
keys and the LEDs appear an expanded I/Os to the CPU.
| Advantages: |
Numeric keypad data entry is
much easier. Professional looking front bezel. |
| Disavantages: |
Works only on T100MD+ model.
|
|
- Download Installation Guide:
inst-HMI.pdf
- Download TRiLOGI programs
for use with the MD-HMI: HMI.zip
|
Serial Port Based HMI
All the T100MD and MX families of
PLCs support MODBUS and OMRON C20H protocols on both their RS232C and RS485
ports. Hence the PLC can work with a wide variety of third party HMIs and SCADA
software that speaks MODBUS or OMRON protocols via the RS232 or RS485 port. The
following are just some of those we have tested or known to work with our PLCs,
Any HMI or SCADA that supports generic MODBUS devices should work with the
M-series PLCs.
| 1 |
Optimation Operator
Interface
http://www.optimate.com
Model: KM420
|
We
tested the the 400 series model KM420. Other models should be useable in the
similar manner. Both MODBUS protocol and the Optimate proprietary HEX protocols
can be used. (When using Hex protocol, the PLC is the master and the HMI is the
slave).
Application Notes:
1. TRi-Optimate-Modbus.zip
2. TRi-OptimateHex.zip
|
| 2 |
Taian OPS6
Touch Panel Display
|
Use RIDDER's Panel-PC
systems
By
selecting the PLC type as Modicon 984 RTU slave, the Taian OPS6 touch panel
works very well with the M-series PLC's RS485 port. We tested the Op26L series
model. Other models should be useable in the similar manner.
Application
Note: TaianOPS6.zip
|
| 3. |
Other HMI brands that have been successfully used by our
customers.
- Maple Systems
- Proface
- Hakko
- GE Fanuc Quickpanel.
- Petlite.
|
Use
RIDDER's Panel-PC systems
|
|
Copyright(c) 2002-2003 Ridder's. All rights reserved.
ridders.pack@pandora.be
|
